Last time we formulated the problem of isosurface extraction and discussed some general approaches at a high level. Today, we’re going to get very specific and look at meshing in particular.

For the sake of concreteness, let us suppose that we have approximated our potential field by sampling it onto a cubical grid at some fixed resolution. To get intermediate values, we’ll just interpolate between grid points using the standard trilinear interpolation. This is like a generalization of Minecraft-style voxel surfaces. Our goal in this article is to figure out how to extract a mesh of the implicit surface (or zero-crossings of ). In particular, we’re going to look at three different approaches to this problem:

## Marching Cubes

By far the most famous method for extracting isosurfaces is the marching cubes algorithm. In fact, it is so popular that the term `marching cubes’ is even more popular than the term `isosurface’ (at least according to Google)! It’s quite a feat when an algorithm becomes more popular than the problem which it solves! The history behind this method is very interesting. It was originally published back in SIGGRAPH 87, and then summarily patented by the Lorensen and Cline. This fact has caused a lot of outrage, and is been widely cited as one of the classic examples of patents hampering innovation. Fortunately, the patent on marching cubes expired back in 2005 and so today you can freely use this algorithm in the US with no fear of litigation.

Much of the popularity of marching cubes today is due in no small part to a famous article written by Paul Bourke. Back in 1994 he made a webpage called “Polygonizing a Scalar Field”, which presented a short, self-contained reference implementation of marching cubes (derived from some earlier work by Cory Gene Bloyd.) That tiny snippet of a C program is possibly ** the most copy-pasted code of all time**. I have seen some variation of Bloyd/Bourke’s code in

**every**implementation of marching cubes that I’ve ever looked at, without exception. There are at least a couple of reasons for this:

- Paul Bourke’s exposition is really good. Even today, with many articles and tutorials written on the technique, none of them seem to explain it quite as well. (And I don’t have any delusions that I will do any better!)
- Also their implementation is very small and fast. It uses some clever tricks like a precalculated edge table to speed up vertex generation. It is difficult to think of any non-trivial way to improve upon it.
- Finally, marching cubes is incredibly difficult to code from scratch.

This last point needs some explaining, Conceptually, marching cubes is rather simple. What it does is sample the implicit function along a grid, and then checks the sign of the potential function at each point (either +/-). Then, for every edge of the cube with a sign change, it finds the point where this edge intersects the volume and adds a vertex (this is just like ray casting a bunch of tiny little segments between each pair of grid points). The hard part is figuring out how to stitch some surface between these intersection points. Up to the position of the zero crossings, there are different possibilities, each of which is determined by the sign of the function at the 8 vertices of the cube:

Some of the marching cubes special cases. (c) Wikipedia, created by Jean-Marie Favreau.

Even worse, some of these cases are ambiguous! The only way to resolve this is to somewhat arbitrarily break the symmetry of the table based on a case-by-case analysis. What a mess! Fortunately, if you just download Bloyd/Bourke’s code, then you don’t have to worry about any of this and everything will just work. No wonder it gets used so much!

## Marching Tetrahedra

Both the importance of isosurface extraction and the perceived shortcomings of marching cubes motivated the search for alternatives. One of the most popular was the marching tetrahedra, introduced by Doi and Koide. Besides the historical advantage that marching tetrahedra was not patented, it does have a few technical benefits:

- Marching tetrahedra does not have ambiguous topology, unlike marching cubes. As a result, surfaces produced by marching tetrahedra are always manifold.
- The amount of geometry generated per tetrahedra is much smaller, which might make it more suitable for use in say a geometry shader.
- Finally, marching tetrahedra has only cases, a number which can be further reduced to just 3 special cases by symmetry considerations. This is enough that you can work them out by hand.

**Exercise: **Try working out the cases for marching tetrahedra yourself. (It is really not bad.)

The general idea behind marching tetrahedra is the same as marching cubes, only it uses a tetrahedral subdivision. Again, the standard reference for practical implementation is Paul Bourke (same page as before, just scroll down a bit.) While there is a lot to like about marching tetrahedra, it does have some draw backs. In particular, the meshes you get from marching tetrahedra are typically about 4x larger than marching cubes. This makes both the algorithm and rendering about 4x slower. If your main consideration is performance, you may be better off using a cubical method. On the other hand, if you really need a manifold mesh, then marching tetrahedra could be a good option. The other nice thing is that if you are obstinate and like to code everything yourself, then marching tetrahedra may be easier since there aren’t too many cases to check.

## The Primal/Dual Classification

By now, both marching cubes and tetrahedra are quite old. However, research into isosurface extraction hardly stopped in the 1980s. In the intervening years, many new techniques have been developed. One general class of methods which has proven very effective are the so-called `dual’ schemes. The first dual method, surface nets, was proposed by Sarah Frisken Gibson in 1999:

S.F. Gibson, (1999) “Constrained Elastic Surface Nets” Mitsubishi Electric Research Labs, Technical Report.

The main distinction between dual and primal methods (like marching cubes) is the way they generate surface topology. In both algorithms, we start with the same input: a volumetric mesh determined by our samples, which I shall take the liberty of calling a *sample complex* for lack of a better term. If you’ve never heard of the word cell complex before, you can think of it as an n-dimensional generalization of a triangular mesh, where the `cells’ or facets don’t have to be simplices.

In the sample complex, vertices (or 0-cells) correspond to the sample points; edges (1-cells) correspond to pairs of nearby samples; faces (2-cells) bound edges and so on:

Here is an illustration of such a complex. I’ve drawn the vertices where the potential function is negative black, and the ones where it is positive white.

Both primal and dual methods walk over the sample complex, looking for those cells which cross the 0-level of the potential function. In the above illustration, this would include the following faces:

### Primal Methods

Primal methods, like marching cubes, try to turn the cells crossing the bounary into an isosurface using the following recipe:

- Edges crossing the boundary become vertices in the isosurface mesh.
- Faces crossing the boundary become edges in the isosurface mesh.
- …
- n-cells crossing the boundary become (n-1)-cells in the isosurface mesh.

One way to construct a primal mesh for our sample complex would be the following:

This is pretty nice because it is easy to find intersection points along edges. Of course, there is some topological ambiguity in this construction. For non-simplicial cells crossing the boundary it is not always clear how you would glue the cells together:

As we have seen, these ambiguities lead to exponentially many special cases, and are generally a huge pain to deal with.

### Dual Methods

Dual methods on the other hand use a very different topology for the surface mesh. Like primal methods, they only consider the cells which intersect the boundary, but the rule they use to construct surface cells is very different:

- For every edge crossing the boundary, create an (n-1) cell. (Face in 3D)
- For every face crossing the boundary, create an (n-2) cell. (Edge in 3D)
- …
- For every d-dimensional cell, create an (n-d) cell.
- …
- For every n-cell, create a vertex.

This creates a much simpler topological structure:

The nice thing about this construction is that unlike primal methods, the topology of the dual isosurface mesh is completely determined by the sample complex (so there are no ambiguities). The disadvantage is that you may sometimes get non-manifold vertices:

## Make Your Own Dual Scheme

To create your own dual method, you just have to specify two things:

- A sample complex.
- And a rule to assign vertices to every n-cell intersecting the boundary.

The second item is the tricky part, and much of the research into dual methods has focused on exploring the possibilities. It is interesting to note that this is the opposite of primal methods, where finding vertices was pretty easy, but gluing them together consistently turned out to be quite hard.

### Surface Nets

Here’s a neat puzzle: what happens if we apply the dual recipe to a regular, cubical grid (like we did in marching cubes)? Well, it turns out that you get the same boxy, cubical meshes that you’d make in a Minecraft game (topologically speaking)!

Left: A dual mesh with vertex positions snapped to integer coordinates. Right: A dual mesh with smoothed vertex positions.

So if you know how to generate Minecraft meshes, then you already know how to make smooth shapes! All you have to do is squish your vertices down onto the isosurface somehow. How cool is that?

This technique is called “surface nets” (remember when we mentioned them before?) Of course the trick is to figure out where you place the vertices. In Gibson’s original paper, she formulated the process of vertex placement as a type of global energy minimization and applied it to arbitrary smooth functions. Starting with some initial guess for the point on the surface (usually just the center of the box), her idea is to perturb it (using gradient descent) until it eventually hits the surface somewhere. She also adds a spring energy term to keep the surface nice and globally smooth. While this idea sounds pretty good in theory, in practice it can be a bit slow, and getting the balance between the energy terms just right is not always so easy.

### Naive Surface Nets

Of course we can often do much better if we make a few assumptions about our functions. Remember how I said at the beginning that we were going to suppose that we approximated by trilinear filtering? Well, we can exploit this fact to derive an optimal placement of the vertex in each cell — *without having to do any iterative root finding!* In fact, if we expand out the definition of a trilinear filtered function, then we can see that the 0-set is always a hyperboloid. This suggests that if we are looking for a 0-crossings, then a good candidate would be to just pick the vertex of the hyperboloid.

Unfortunately, calculating this can be a bit of a pain, so let’s do something even simpler: Rather than finding the optimal vertex, let’s just compute the edge crossings (like we did in marching cubes) and then take their center of mass as the vertex for each cube. Surprisingly, this works pretty well, and the mesh you get from this process looks similar to marching cubes, only with fewer vertices and faces. Here is a side-by-side comparison:

Left: Marching cubes. Right: Naive surface nets.

Another advantage of this method is that it is really easy to code (just like the naive/culling algorithm for generating Minecraft meshes.) I’ve not seen this technique published or mentioned before (probably because it is too trivial), but I have no doubt someone else has already thought of it. Perhaps one of you readers knows a citation or some place where it is being used in practice? Anyway, feel free to steal this idea or use it in your own projects. I’ve also got a javascript implementation that you can take a look at.

### Dual Contouring

Say you aren’t happy with a mesh that is bevelled. Maybe you want sharp features in your surface, or maybe you just want some more rigorous way to place vertices. Well my friend, then you should take a look at dual contouring:

T. Ju, F. Losasso, S. Schaefer, and J. Warren. (2004) “Dual Contouring of Hermite Data” SIGGRAPH 2004

Dual contouring is a very clever solution to the problem of where to place vertices within a dual mesh. However, it makes a very big assumption. In order to use dual contouring you need to know not only the value of the potential function but also its gradient! That is, for each edge you must compute the point of intersection AND a normal direction. But if you know this much, then it is possible to reformulate the problem of finding a nice vertex as a type of linear least squares problem. This technique produces very high quality meshes that can preserve sharp features. As far as I know, it is still one of the best methods for generating high quality meshes from potential fields.

Of course there are some downsides. The first problem is that you need to have Hermite data, and recovering this from an arbitrary function requires using either numerical differentiation or applying some clunky automatic differentiator. These tools are nice in theory, but can be difficult to use in practice (especially for things like noise functions or interpolated data). The second issue is that solving an overdetermined linear least squares problem is much more expensive than taking a few floating point reciprocals, and is also more prone to blowing up unexpectedly when you run out of precision. There is some discussion in the paper about how to manage these issues, but it can become very tricky. As a result, I did not get around to implementng this method in javascript (maybe later, once I find a good linear least squares solver…)

## Demo

As usual, I made a WebGL widget to try all this stuff out (caution: this one is a bit browser heavy):

### Click here to try the demo in your browser!

This tool box lets you compare marching cubes/tetrahedra and the (naive) surface nets that I described above. The Perlin noise examples use the javascript code written by Kas Thomas. Both the marching cubes and marching tetrahedra algorithms are direct ports of Bloyd/Bourke’s C implementation. Here are some side-by-side comparisons.

#### Left-to-right: Marching Cubes (MC), Marching Tetrahedra (MT), Surface Nets (SN)

MC: 15268 verts, 7638 faces. MT: 58580 verts, 17671 faces. SN: 3816 verts, 3701 faces.

MC: 1140 verts, 572 faces. MT: 4200 verts, 1272 faces. SN: 272 verts, 270 faces.

MC: 80520 verts, 40276 faces. MT: 302744 verts, 91676 faces. SN: 20122 verts, 20130 faces.

MC: 172705 verts, 88071 faces. MT: 639522 verts, 192966 faces. SN: 41888 verts, 40995 faces.

A few general notes:

- The controls are left mouse to rotate, right mouse to pan, and middle mouse to zoom. I have no idea how this works on Macs.
- I decided to try something different this time and put a little timing widget so you can see how long each algorithm takes. Of course you really need to be skeptical of those numbers, since it is running in the browser and timings can fluctuate quite randomly depending on totally arbitrary outside forces. However, it does help you get something of a feel for the relative performance of each method.
- In the marching tetrahedra example there are frequently many black triangles. I’m not sure if this is because there is a bug in my port, or if it is a problem in three.js. It seems like the issue might be related to the fact that my implementation mixes quads and triangles in the mesh, and that three.js does not handle this situation very well.
- I also didn’t implement dual contouring. It isn’t that much different than surface nets, but in order to make it work you need to get Hermite data and solve some linear least squares problems, which is hard to do in Javascript due to lack of tools.

## Benchmarks

To compare the relative performance of each method, I adapted the experimental protocol described in my previous post. As before, I tested the experiments on a sample sinusoid, varying the frequency over time. That is, I generated a volume volume plot of

Over the range . Here are the timings I got, measured in milliseconds

Frequency | Marching Cubes | Marching Tetrahedra | Surface Nets |

0 | 29.93 | 57 | 24.06 |

1 | 43.62 | 171 | 29.42 |

2 | 61.48 | 250 | 37.78 |

3 | 93.31 | 392 | 47.72 |

4 | 138.2 | 510 | 51.36 |

5 | 145.8 | 620 | 74.54 |

6 | 186 | 784 | 83.99 |

7 | 213.2 | 922 | 97.34 |

8 | 255.9 | 1070 | 112.4 |

9 | 272.1 | 1220 | 109.2 |

10 | 274.6 | 1420 | 124.3 |

By far marching tetrahedra is the slowest method, mostly on account of it generating an order of magnitude more triangles. Marching cubes on the other hand, despite generating nearly 2x as many primitives was still pretty quick. For small geometries both marching cubes and surface nets perform comparably. However, as the isosurfaces become more complicated, eventually surface nets win just on account of creating fewer primitives. Of course this is a bit like comparing apples-to-oranges, since marching cubes generates triangles while surface nets generate quads, but even so surface nets still produce slightly less than half as many facets on the benchmark. To see how they stack up, here is a side-by-side comparison of the number of primitives each method generates for the benchmark:

Frequency | Marching Cubes | Marching Tetrahedra | Surface Nets |

0 | 0 | 0 | 0 |

1 | 15520 | 42701 | 7569 |

2 | 30512 | 65071 | 14513 |

3 | 46548 | 102805 | 22695 |

4 | 61204 | 130840 | 29132 |

5 | 77504 | 167781 | 37749 |

6 | 92224 | 197603 | 43861 |

7 | 108484 | 233265 | 52755 |

8 | 122576 | 263474 | 58304 |

9 | 139440 | 298725 | 67665 |

10 | 154168 | 329083 | 73133 |

## Conclusion

Each of the isosurface extraction methods has their relative strengths and weaknesses. Marching cubes is nice on account of the free and easily usable implementations, and it is also pretty fast. (Not to mention it is also the most widely known.) Marching tetrahedra solves some issues with marching cubes at the expense of being much slower and creating far larger meshes. On the other hand surface nets are much faster and can be extended to generate high quality meshes using more sophisticated vertex selection algorithms. It is also easy to implement and produces slightly smaller meshes. The only downside is that it can create non-manifold vertices, which may be a problem for some applications. I unfortunately never got around to properly implementing dual contouring, mostly because I’d like to avoid having to write a robust linear least squares solver in javascript. If any of you readers wants to take up the challenge, I’d be interested to see what results you get.

### PS

I’ve been messing around with the wordpress theme a lot lately. For whatever reason, it seems like the old one I was using would continually crash Chrome. I’ve been trying to find something nice and minimalist. Hopefully this one works out ok.

Thanks for your outstanding survey of algorithms and excellent demo. Like you said, Marching Cubes has become so entrenched no one bothers thinking about alternatives.

Question: Since Marching Tetrahedrons produces smooth meshes and avoids non-manifold surfaces, why can’t you just post-process the resulting mesh with a fast and conservative mesh reduction algorithm like Stan Melax’s http://dev.gameres.com/program/visual/3d/PolygonReduction.pdf (PDF)?

It seems like that would create a near optimal mesh while keeping the polygon count low.

jones1618: You could do that, but the naive two-step approach tends to give you a very large intermediate result, which is unfortunate because you’re just throwing most of the triangles away anyway. Worse yet, the intermediate isosurface will generally grow as the inverse-square of the smallest detail you want to capture.

A better technique has been presented by Attali, Cohen-Steiner and Edelsbrunner, where the idea is to carefully run both algorithms at once: ftp://ftp-sop.inria.fr/geometrica/dcohen/Papers/sgp_he_da.pdf

That’s a really neat idea! I am working on writing up something about level of detail, but I don’t know when it will be ready yet (might take a week or two). I’ll probably use this reference, if you don’t mind.

It certainly has been fun watching that tiny snippet of code travel the world for so many years. Great article and great demo!

Whoa! The legend himself! I’m speechless. Thank you for commenting!

People keep forwarding this to me … nice article.

You say “possibly the most copy-pasted code of all time”, not sure about that but I had always thought the following was the most copied/pasted code of mine, at least it has the most contributed language translations.

http://paulbourke.net/papers/triangulate/

I’m shocked! Thank you for the comment! I must say I find your work very inspiring. Perhaps my assessment as the most-copy-pasted was a bit hyperbolic, but there is no denying that is quite widely used. Maybe we could just say that you are the “most copied programmer” in computer graphics? 🙂

Excellent write-up and demo! If you haven’t seen it already, I encourage you to check out Miguel Cepero’s work at Procedural World:

http://procworld.blogspot.co.uk/

He uses dual contouring for procedural generation of terrain and architecture, with some impressive results.

Great article! I’ve just written my own Marching Cubes routine, (and yes, I too copied Paul Bourke’s code,) but now I’m all fired up to start working on a dual contour method. Thanks for sharing your knowledge; I’ll be reading your further writings.

Would surface nets with a tetrahedron grid instead of cubes generate a better mesh?

The mesh might not necessarily be “better” but it would necessarily be manifold (on the other hand, if you need a manifold mesh, then maybe you would consider it better!). However, since tetrahedral subdivisions are generally more dense, you would probably end up with more vertices/faces to get the same level of accuracy as in a hexahedral subdivision.

Why marching tetrahedra causes stange colored triangles on some spots?

http://tinypic.com/r/kud8w/6

Normals are not correct noticed it also!!

I am trying to write an implementation of surface nets in Unity using C#, but my meshes aren’t coming out quite right. The implementation I have isn’t correctly flipping faces. It’s keeping everything facing one direction. Would someone be willing to take a look at it for me?

Hopefully you figured it out already. I have already made an implementation in Unity to play around with the possibility of using it in a game. If you haven’t gotten it working, let me know and I can possibly point you in the right direction.

-Dane

Any chance you could help me out with that? I’ve been trying for a while now.. I got cubes rendering(lolsimple), but I don’t have any idea what to do about surface nets. I’m trying to make a more realistic terrain, to use instead of the builtin 2D stuff.

Hey, I’m doing the same thing and was wondering if you could help me solve some issues with making it use a dataset split into 16x16x16 (or arbitrarily sized) chunks.

Nice article and approximation, AFAK there is not references for your algorithm, you should try to publish it in a journal or conference.

Are you planning to finish Dual Contouring algorithm?

Hi, I’ve ported your naive surface nets code to C# using Unity and I’ve been working on making a chunked dataset for it. I’m almost there, but I’m having issues with the two neighboring chunks generating some of the same faces. as seen here: http://puu.sh/6jGq3.jpg

If anyone has an idea, let me know by emailing me at emmerich.kyle@gmail.com, thanks 😀

Your Naive Surface Net is beautiful! I will definitely be using it in my game… assuming you don’t mind of course. I will take a lack of response as your approval. *laughs*

Great article. This is by far the best article I’ve read on polygonal voxel terrain. (layman’s speak, I realize. However, I am a layman.)

Hello!

I translated the surface nets javascript code to C. The code is here on github: https://github.com/r03ert0/surface-nets

It works nicely, but there are some weird spikes in the mesh, and I can’t figure out where they come from. I may have done a mistake in the translation, but I can’t find anything… any idea??

(by the way, I looked at the newer code, but I don’t know if it would be possible to translate the gigantic switch generation code to C…)

thank you!

roberto

for “Naive Surface Nets”, you say: “I’ve not seen this technique published or mentioned before (probably because it is too trivial), but I have no doubt someone else has already thought of it. Perhaps one of you readers knows a citation or some place where it is being used in practice?”

I believe it is equivalent to this:

“Mesh Displacement: An Improved Contouring Method for Trivariate Data”

http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.49.5214

From: http://chrishecker.com/My_liner_notes_for_spore

My implementation of it starts at line 580 here: https://github.com/aardappel/lobster/blob/master/dev/src/meshgen.cpp

It’s not the same thing, though that paper is really cool. What they are talking about is refining the generated mesh using an extra smoothing pass. It is sort of like a 1 pass simplified version of Botsch and Kobbelt’s mesh refinement algorithm:

https://www.researchgate.net/publication/221316497_A_Remeshing_Approach_to_Multiresolution_Modeling

Hi guys, I want to code the Naive Surface Nets technique from scratch (in C) so I fully grasp it. After I compute the vertices on the grid cell edges (if they are zero crossings) and average them to obtain the centroid I’m left with cells that are either empty or contain a single vertex. Do I turn those single vertices in to quads so that each non-empty cell now contains a quad, or do those vertices become a vertex in the mesh ? I don’t get it. Thanks.

Those vertices become the vertices in the mesh. You add a quad for each edge in the initial mesh where the is a zero crossing.

Hey Mikola, really neat article. I made my own implementation of surface nets with a couple differences, but the overall result is the same. The main difference is that I do not use a signed distance field as the source of my volume, but a chunk of voxels. Since I was trying to mesh a terrain, I arrived in a really nasty problem that araises with chunked terrain. The algorithm only sees the a single chunk at a time, so at the borders it doesn’t know that there might be neighboring chunks. Because of that the final result is filled with seams between the chunks that are unmeshed. I have seen a couple of smart people trying to come up with clever solutions to this problem, but I was wondering if you have any thoughts on how to solve. Keep up the amazing blog, your articles inspired and help me get into voxels, topology and meshing, and I’m sure others feel the same! Cheers!

Hey Mikola,

I really appreciate the amount of work you’ve put into this explanation and your javascript implementation.

I’ve rewritten a C# implementation for Unity using Naive Surface nets, in this case for visualizing electric and radiation fields, and wanted to share a C# version in case anyone was looking for one. I wasn’t able to find one out there myself so I went ahead and wrote it here: https://github.com/TomaszFoster/NaiveSurfaceNets/blob/master/NaiveSurfaceNets.cs

Thanks!

This quite an interesting article, and I was impressed by how the surface nets algorithm was able to represent the same surface to the same level of accuracy using far fewer vertices and faces than the marching cubes algorithm. However, the difference in these numbers seemed suspiciously large on visual inspection of the surface, and I now think the numbers are wrong for marching cubes (and probably for marching tetras too) throughout this article.

Playing around with the JavaScript demo, which appears to be where the numbers came from, I counted the vertices manually. Using the tetrahedron shape (because it’s easier to count), I counted only 286 vertices and 552 faces for marching cubes, which is an order of magnitude less than the 3864 vertices and 1912 faces that are calculated by the algorithm. It’s possible that there are some tiny faces that I couldn’t see that are adding to the count, but I don’t see how it could blow it out by more than a factor of 10. There appears to be a bug in vertex/face counting algorithm, at least for marching cubes. For surface nets, the number of vertices counted seems to be about right.

Your description of Naive Surface Nets, arguably one of the most important parts of the article, is extremely cryptic, which is a sad affair 😦